Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clear Pulse module and transducer for ES127
05-20-20, 06:27 PM
Post: #1
Clear Pulse module and transducer for ES127
Question about ClearPulse for the ES127.

I have a Raymarine ES127 Multifunction display. I am looking to add the clear pulse fishfinder / depth map to my display.
Which clear pulse sonar module do I need for this unit (if I need one) and what transducer would work? I am looking for a thru hull transducer, as I already have an unused Airman analog transducer that I can pull out and replace. My boat has 3 transducers. A new DTS800, another Airmar that isnt connected, and another that was connected to the old raymarine analog sonar module which I removed.

Thanks in advance for your help.
Find all posts by this user
Quote this message in a reply
05-21-20, 10:28 AM
Post: #2
RE: Clear Pulse module and transducer for ES127
Hello michels280,

What is the model of the transducer that was plugged into the analog sonar unit? Or which raymarine sounder unit was it?

The transducer is more than likely compatible with the eS127 which has the clearpulse ff built in.

Chris,
Find all posts by this user
Quote this message in a reply
05-25-20, 08:33 AM
Post: #3
RE: Clear Pulse module and transducer for ES127
Hi Chris.

The sounder unit was the DSM 300. Im not sure which transducer is in there, but I'm sure it needs to be replaced.
Find all posts by this user
Quote this message in a reply
05-26-20, 03:06 PM
Post: #4
RE: Clear Pulse module and transducer for ES127
Hello michels280,

We would recommend getting the adapter E66066 for that style of transducer. If that transducer in the boat was good all you would need is the above adapter to give you clearpulse sonar. The eS127 has this technology built in. If the transducer needs to be replaced look for the part # on the white tag on the transducer cable. This will give you the part # of the transducer to replace it with.

Chris,
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)