Raymarine forum / Raymarine Forums / Fishfinders v / [JB] [JB11] RV-220 Mounting

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] [JB11] RV-220 Mounting
05-25-20, 01:09 PM (This post was last modified: 05-29-20 12:36 AM by Jules - Raymarine - Moderator.)
Post: #1
Vettepro Offline
Junior Member
**
 		Posts: 24
Joined: May 2016
Reputation: 0
[JB11] RV-220 Mounting
I am adding two RV-220 transducers to My Axiom 12 MFD.
They are being mounted in a 34' Silverton Convertible. How far apart do the two transducers need to be for best performance? Is there a recommended minimum or maximum distance between the pair?
Find all posts by this user
Quote this message in a reply
05-29-20, 12:42 AM
Post: #2
Jules - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 98
Joined: Oct 2019
Reputation: 0
RE: [JB11] RV-220 Mounting
Hello Vettepro,

Detailed installation instructions (page22) are available on the Raymarine website here > RV-2xx 3D Bronze Thru-Hull Transducer Installation instructions should you have not received them with your product.

Happy boating and kind regards
Jules
Find all posts by this user
Quote this message in a reply
05-30-20, 09:02 PM
Post: #3
Vettepro Offline
Junior Member
**
 		Posts: 24
Joined: May 2016
Reputation: 0
RE: [JB11] RV-220 Mounting
Thank you for your reply. As always, you all are very informative.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication