Raymarine forum / Raymarine Forums / Autopilots v / [LW] [LW11] P70 autopilot data ommission

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] P70 autopilot data ommission
05-29-20, 09:56 AM (This post was last modified: 06-03-20 04:08 AM by Louise - Raymarine - Moderator.)
Post: #1
MBileckyj Offline
Junior Member
**
 		Posts: 17
Joined: Aug 2018
Reputation: 0
[LW11] P70 autopilot data ommission
The P70 pilot cannot pick up Cog/SOG datA from my network so when engaging Auto I revive a “No pilot data” error msg, even though the Autohelm ultimate and E7 MFD show the data. I have also lost AIS targets on the E7 but not AIS alarms, very strange. Maybe coincidental but occurred after told to perform system reset to enable Course Up display. Any link between these?

System EV-1, ACU400, p70 control head, E7 Mfd on Lightouse 2, Vesper Marine xb800 WiFi link to E7. Autohel ST50, integrated via ShipModul multiplexer

Software versions
P70. V3.07
EV-1 v2.17
ACU400 v2.33
Find all posts by this user
06-03-20, 10:32 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] P70 autopilot data ommission
Dear MBileckyj,

Please send a system diagram to [email protected]

Many Thanks
Louise
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication