No autopilot after R17 update

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

No autopilot after R17 update

06-28-16, 10:06 AM (This post was last modified: 06-28-16 10:08 AM by Chuck - Raymarine - Moderator.)

Post: #12

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: No autopilot after R17 update

Night Heron,

Product software updates are generally not covered by warranty unless performed by Raymarine's Product Repair Center. It is certainly possible to unplug the MFD and ACU from the currently installed backbone and then interface these two items via a simple backbone created for this purpose. A simple backbone may be constructed from the following components:

- A06064 SeaTalkng 5-Way Connector
- A06031 SeaTalkng Termination Plugs x 2
- A06049 SeaTalkng Power Cable - may be deleted should the ACU300's SeaTalkng power switch be configured to the ON position
- a SeaTalkng Spur Cables of appropriate length to interface the a/c/e/eS/gS-Series MFD to the SeaTalkng 5-Way Connector.
- R12112 SeaTalkng to SPX Course Computer Cable (molded)