Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS 650 problem when using auto pilot
07-21-16, 03:12 PM (This post was last modified: 07-22-16 08:52 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: AIS 650 problem when using auto pilot
Hello Chuck
I installed the latest version of software update:

GPM400 V4.66
Seatalk converter V2.01
AIS 650 V1.15

The NMEA 0183 port has the following equipment:
- VHF Ray240
- Airmar Weather Station PB150

Beside the problem between AIS that went silence or OFF when Autopilot in use, I also have a problem with the Ray240 VHF. The Ray240 never display DSC messages on chart plotter. I can see the DSC alarm message on the Ray240, but I didn't see anything on the display of the GPM400. The Ray240 did receive GPS information from GPM400. How do I test to see if the Ray240 transmit anything to the GPM400?

Thank you Chuck.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: AIS 650 problem when using auto pilot - HiViet - 07-21-16 03:12 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)