e165 v17.45 units selection
|
08-10-16, 12:17 PM
Post: #8
|
|||
|
|||
RE: e165 v17.45 units selection
Chuck, the speed & distance "units" problem is with the e165 MFD.
As stated earlier, the ST converter is v 2.01. The ST60 Tridata is not a repeater, it has connected transducers. Changing units on the Tridata has no effect on the ability (or inability) to select units on the MFD. Once again, the issue is an inability to set speed & distance units on the e165 when the ST converter & Tridata are connected. I believe this was not an issue until the MFD was updated to v17.45. I would like to revert to v16.47 to verify. Can you supply v 16.47? Mark |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
e165 v17.45 units selection - markct - 08-01-16, 01:02 PM
RE: e165 v17.45 units selection - Mark - Raymarine - Moderator - 08-01-16, 02:48 PM
RE: e165 v17.45 units selection - markct - 08-01-16, 03:30 PM
RE: e165 v17.45 units selection - Mark - Raymarine - Moderator - 08-02-16, 02:26 PM
RE: e165 v17.45 units selection - markct - 08-02-16, 03:02 PM
RE: e165 v17.45 units selection - markct - 08-09-16, 12:33 PM
RE: e165 v17.45 units selection - Chuck - Raymarine - Moderator - 08-09-16, 01:55 PM
RE: e165 v17.45 units selection - markct - 08-10-16 12:17 PM
RE: e165 v17.45 units selection - Chuck - Raymarine - Moderator - 08-10-16, 03:01 PM
RE: e165 v17.45 units selection - markct - 08-11-16, 08:36 AM
RE: e165 v17.45 units selection - Chuck - Raymarine - Moderator - 08-11-16, 09:15 AM
|
User(s) browsing this thread: 1 Guest(s)