Autopilot repair
|
11-15-16, 10:32 AM
Post: #7
|
|||
|
|||
RE: Autopilot repair
Bajanfisherman,
Autopilot control head designs introduced prior to the p70/p70R (ex. ST600x, ST700x, ST800x, ST70, etc.) cannot be used to executed the Dockside Wizard for an Evolution autopilot. However, as the system also features an a/c/e/eS/gS-Series MFD, then the MFD may be used to execute the Dockside Wizard if it has been updated with the latest available Raymarine product software updates. Pilot Settings and Commissioning via an a/e/e/eS/gS-Seris MFD are addressed within Section 7.10 and 7.11 of the LightHouse MFDs Release 17 Operation Instructions. The command sequence to enter into autopilot set-up is HOME->SET-UP->EXTERNAL DEVICES->PILOT SET-UP->PILOT SETTINGS. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Autopilot repair - Bajanfisherman - 11-01-16, 07:36 PM
RE: Autopilot repair - Chuck - Raymarine - Moderator - 11-04-16, 04:37 AM
RE: Autopilot repair - Bajanfisherman - 11-06-16, 03:16 AM
RE: Autopilot repair - Chuck - Raymarine - Moderator - 11-09-16, 04:14 PM
RE: Autopilot repair - Bajanfisherman - 11-09-16, 04:48 PM
RE: Autopilot repair - Bajanfisherman - 11-14-16, 08:53 AM
RE: Autopilot repair - Chuck - Raymarine - Moderator - 11-15-16 10:32 AM
RE: Autopilot repair - Bajanfisherman - 11-15-16, 12:00 PM
RE: Autopilot repair - Chuck - Raymarine - Moderator - 11-15-16, 01:24 PM
|
User(s) browsing this thread: 2 Guest(s)