Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ECI-100 and Volvo EVC-mc
11-02-16, 06:17 AM
Post: #1
ECI-100 and Volvo EVC-mc
Hi!

I have a Volvo Penta D3-160A-A (early 2005) engine with 1st generation EVC-mc instrumentation.

This early version of EVC transfers information between the EVC brain box and the instruments on J1708. But there is a connection between engine ECU and EVC box that runs on J1939.

Is it possible to splice a ECI-100 to this J1939 bus and convert engine data to a seatalk ng backbone?

I attach a wiring schematic of the EVC-mc system.
Find all posts by this user
Quote this message in a reply
11-04-16, 02:53 PM
Post: #2
RE: ECI-100 and Volvo EVC-mc
Welcome to the Raymarine Forum John,

Unfortunately, the ECI-100's support is limited to Volvo EVC-C, EVC-D, EVC-E systems. Should the engine system additionally support J1939 as you have suggested then you may want to look into a J1939 to NMEA 2000 engine gateway (ex. Maretron J2K100, etc.).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)