Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2006 E120 multifunction disply
01-31-17, 03:20 PM
Post: #1
2006 E120 multifunction disply
We bought a 2006 Cruisers Yachts 385 in August 2016 and the one thing that I would like to change on the boat is the digital readout depth sounder display. The boat is equipped with a Raymarine E120 Multifunction Display system with the Raymarine Seatalk Network module and has a Raymarine P79 transducer unit. Can I install a Raymarine DSM 300 module and disconnect the transducer from the digital display to connect it to the E120 (the P79 is compatible with the DSM300) using the DSM300??
Find all posts by this user
Quote this message in a reply
01-31-17, 04:14 PM
Post: #2
RE: 2006 E120 multifunction disply
Welcome to the Raymarine Forum Wvryders,

Q1. Can I install a Raymarine DSM 300 module and disconnect the transducer from the digital display to connect it to the E120 (the P79 is compatible with the DSM300) using the DSM300??
A1. No. Please click here to view a FAQ addressing this subject. However the currently installed P79 reservoir may be left in place to accommodate the P79 fishfinder transducer. In this case, the instrument P79 transducer would be replaced with the E66008 version of the P79 transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-31-17, 10:34 PM (This post was last modified: 02-01-17 08:48 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: 2006 E120 multifunction disply
Thank you Chuck, very helpful reply.
Find all posts by this user
Quote this message in a reply
02-01-17, 08:48 AM
Post: #4
RE: 2006 E120 multifunction disply
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)