Raymarine forum / Raymarine Forums / Networking / System Integration v / SeaTalk to SeaTalkng converter setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SeaTalk to SeaTalkng converter setup
02-07-17, 03:53 PM
Post: #13
Petersailor
Unregistered
 		 
RE: SeaTalk to SeaTalkng converter setup
Chuck,
See attached Option no.1.
Will it be possible to use the existing STng T-piece from the MFD to connect second STng converter (2) to? Or do I have to install a second T-piece to join the two STng converters together? I know I also could run a backbone cable between the two STng converters but it will be much easier if I could connect it to the T-piece from the MFD.
Also see the proposed connection for the AIS650.
Quote this message in a reply
Post Reply 


Messages In This Thread
SeaTalk to SeaTalkng converter setup - Petersailor - 02-01-17, 03:55 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-02-17, 04:02 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-02-17, 04:26 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-03-17, 03:50 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-03-17, 05:52 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-03-17, 06:04 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-06-17, 04:20 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-07-17 03:53 PM
RE: SeaTalk to SeaTalkng converter setup - Petersailor - 02-08-17, 02:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication