Raymarine forum / Raymarine Forums / Multifunction Displays v / Another SeaTalk 1 system upgrade.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Another SeaTalk 1 system upgrade.
02-08-17, 09:50 PM
Post: #5
bradleyj Offline
Junior Member
**
 		Posts: 16
Joined: Jul 2016
Reputation: 0
RE: Another SeaTalk 1 system upgrade.
Ok, I've got the system connected as we discussed. The e125 is seeing a GPS signal from the RS125 so the SeaTalk bus is being converted properly. The SPX-10 is connected through the SeaTalkNG backbone and I see it in the listing of devices on the e125, but the ST6001 is displaying NO PILOT. I have disconnected the SPX-10 from the SeaTalk bus as you suggested. The ST6001 is connected through the converter with the rest of the SeaTalk devices, but it doesn't seem to be seeing the SPX-10.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Another SeaTalk 1 system upgrade. - bradleyj - 02-08-17 09:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication