Raymarine forum / Raymarine Forums / LightHouse Charts v / eS128 Spontaneous restart using a vector chart.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
eS128 Spontaneous restart using a vector chart.
03-27-17, 04:04 PM (This post was last modified: 03-27-17 04:05 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: eS128 Spontaneous restart using a vector chart.
Welcome to the Raymarine Forum Russell,

Raymarine has duplicated and previously logged the reported issue in conjunction the US NOAA Vector Charts when the MFD is running LightHouse II v17.46 software and one pan/zooms the Chart application screen in the area of Peal Harbor. The problem appears to be limited to that area. A correction to this problem is being sought within a future LightHouse software update. Until the problem has been corrected, it is recommended that those encountering the problem utilize LightHouse US NOAA Raster Charts in the area of Pearl Harbor. Alternatively, should an immediate need for vector charts be desired, then Navionics or C-Map cartography may be used.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: eS128 Spontaneous restart using a vector chart. - Chuck - Raymarine - Moderator - 03-27-17 04:04 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication