CAM 200IP cabling

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

CAM 200IP cabling

03-03-16, 01:55 PM (This post was last modified: 03-03-16 02:42 PM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: CAM 200IP cabling

Welcome to the Raymarine Technical Forum Pdog1989,

Raymarine SeaTalkhs Patch Cable or shielded marine grade CAT5e (or better) cable having shielded RJ45 plugs should be used interface the CAM200IP to an Ethernet/SeaTalkhs switch having shielded RJ45 sockets.

« Next Oldest | Next Newest »

Messages In This Thread

CAM 200IP cabling - Pdog1989 - 03-03-16, 01:39 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 03-03-16 01:55 PM

RE: CAM 200IP cabling - Pdog1989 - 03-03-16, 01:58 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 03-03-16, 02:41 PM

RE: CAM 200IP cabling - george123 - 06-22-16, 06:24 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 07:47 AM

RE: CAM 200IP cabling - george123 - 06-23-16, 09:19 AM

RE: CAM 200IP cabling - george123 - 06-23-16, 02:12 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 02:13 PM

RE: CAM 200IP cabling - george123 - 06-23-16, 04:04 PM

RE: CAM 200IP cabling - Chuck - Raymarine - Moderator - 06-23-16, 04:12 PM

User(s) browsing this thread: 1 Guest(s)