Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNe
04-11-17, 07:48 AM (This post was last modified: 04-11-17 07:49 AM by Chuck - Raymarine - Moderator.)
Post: #1
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNe
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNet Network Switch

Should the Ethernet communications cable which has been interfaced compatible Raymarine product, compatible FLIR thermal camera, Fusion 700/750 Series stereo head unit or compatible IP camera be terminated with a RJ45 (M) plug, then the cable may be adapted (using an A80247 RJ45 (F) to RayNet (F) Adapter) to be mated to the Ethernet NETWORK socket of an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNet Network Switch.

Should the Ethernet communications cable which has been interfaced compatible Raymarine product, compatible FLIR thermal camera, Fusion 700/750 Series stereo head unit or compatible IP camera be terminated with a SeaTalkhs (M) plug, then the cable may be adapted (using an A80160 SeaTalkhs (F) to RayNet (F) Adapter) to be mated to the Ethernet NETWORK socket of an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNet Network Switch.


RAYFAQ#
Visit this user's website Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)