Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Airmar Speed/Temp not recognized by i70s
04-21-17, 07:15 PM
Post: #1
Airmar Speed/Temp not recognized by i70s
Just bought the new i70s instrument and the iTC-5 converter. My depth transducer works great right away but my Airmar speed/temp transducer (might be an ST300) isn't recognized. I get flashing lights inside the iTC-5. Any idea if my Airmar transducer is compatible?
Find all posts by this user
Quote this message in a reply
04-25-17, 01:53 PM
Post: #2
RE: Airmar Speed/Temp not recognized by i70s
Welcome to the Raymarine Forum arcadiahunter28,

In order to address this problem, we will need to positively identify the model of speed/temp transducer which is installed onboard. Should the transducer have been installed for use with a previously owned instrument, then please specify the make/model of instrument that it had been mated to.
Find all posts by this user
Quote this message in a reply
05-23-17, 08:24 AM (This post was last modified: 05-23-17 10:08 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Airmar Speed/Temp not recognized by i70s
All good - I re-initiated the transducer setup and it seems to be working fine.
Find all posts by this user
Quote this message in a reply
05-23-17, 12:57 PM
Post: #4
RE: Airmar Speed/Temp not recognized by i70s
We're glad to learn that the reported problem has been resolved.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)