Raymarine forum / Raymarine Forums / Autopilots v / EV-1 Linearization Problems

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-1 Linearization Problems
04-01-16, 10:56 AM (This post was last modified: 04-01-16 11:02 AM by Steve - Raymarine - Moderator.)
Post: #12
Steve - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 318
Joined: Feb 2016
Reputation: 0
RE: EV-1 Linearization Problems
Please provide a system diagram (hand written will work) of the system and how you are connecting the two backbones, Seatalk NG and NMEA 2000 together. If they are not communicating, the issue is most likely due to incorrect wiring, and backbone construction.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV-1 Linearization Problems - Holts - 03-08-16, 09:19 AM
RE: EV-1 Linearization Problems - Holts - 03-08-16, 12:24 PM
RE: EV-1 Linearization Problems - Holts - 03-08-16, 08:03 PM
RE: EV-1 Linearization Problems - Holts - 03-14-16, 02:22 PM
RE: EV-1 Linearization Problems - Holts - 03-15-16, 08:27 PM
RE: EV-1 Linearization Problems - Holts - 03-31-16, 06:25 PM
RE: EV-1 Linearization Problems - Steve - Raymarine - Moderator - 04-01-16 10:56 AM
RE: EV-1 Linearization Problems - Holts - 04-01-16, 07:55 PM
RE: EV-1 Linearization Problems - Holts - 04-06-16, 09:19 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication