Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Replace C120 Classic with E120 Classic?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replace C120 Classic with E120 Classic?
07-16-18, 04:47 AM (This post was last modified: 07-16-18 01:05 PM by Chuck - Raymarine - Moderator.)
Post: #9
willyritch Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2017
Reputation: 0
RE: [CA11] Replace C120 Classic with E120 Classic?
I don't completely understand this part--if I am hooking up a DSM30 directly to an E-Series Classic (no second display) do I need to use one of the cable assemblies you describe above? For example, to go from the ethernet port on the DSM30 to the ethernet port on the E-Series, do I have to create an ethernet>SeaTalkhs>Seatalkhs Crossover>SeaTalkhs>ethernet assembly?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Replace C120 Classic with E120 Classic? - willyritch - 07-16-18 04:47 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication