Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is the E70013 Compatible the w/eS78 in anyway?
06-22-17, 06:45 AM
Post: #1
Is the E70013 Compatible the w/eS78 in anyway?
Regarding the E70013 and eS78. Are these two compatible in anyway? Or Can they be linked by wifi, bluetooth or a harness so the E70013 can be used as a secondary monitor? The eS78 is in service now with a CPT120 Transducer.
Find all posts by this user
Quote this message in a reply
06-22-17, 09:29 AM (This post was last modified: 06-22-17 09:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Is the E70013 Compatible the w/eS78 in anyway?
Welcome to the Raymrine Forum TheOiler,

Q1. Regarding the E70013 (c125 MFD) and eS78. Are these two compatible in anyway?.

A1. Yes. These MFDs are designed be be interfaced to one another via Ethernet communications to support sharing of all features and resources (except for NTSC/PAL video and Thermal Camera). Should the eS78 MFD have an unused Ethernet NETWORK socket, then these two MFDs would simply be interfaced to one another via an appropriate length of RayNet (F) to RayNet (F) Cable. If not, then it would be necessary to install a HS5 RayNet Network Switch to which each MFD and the other compatible devices having an Ethernet communications port each be connected.
Find all posts by this user
Quote this message in a reply
06-22-17, 09:59 PM (This post was last modified: 06-23-17 09:18 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Is the E70013 Compatible the w/eS78 in anyway?
Thank you for the Welcome and thanks for the info Chuck.
Find all posts by this user
Quote this message in a reply
06-23-17, 09:18 AM
Post: #4
RE: Is the E70013 Compatible the w/eS78 in anyway?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)