Navigation data screen help

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mike,

After commanding navigation from the MFD's Chart application (i.e. Go To a Waypoint / Cursor Position or to Follow a Route), should the data applications' Rolling Road data panel/data item be displayed, it will display
- a corridor with a course line leading toward the location (waypoint or cursor position) being navigated to, a
- corridor boundaries of an indicated width to port and starboard of the course line. Corridor boundary distances will be specified on the bottom left and bottom right.
- a vessel icon positioned near the bottom of the screen ... the relative position of the vessel with respect to the course line will be indicated by the vessel icon's position within the rolling road
- cross track error (XTE) will be indicated at the bottom center
- the name of the waypoint being navigated to or Go To Cursor will be specified below the XTE value specified
- steering direction to port (red arrow) or to starboard (green arrow) will be indicated should the vessel's position be located to the port or starboard side of the course line. Steering direction will also be specified beneath the name of the waypoint being navigated to or Go To Cursor.