Raymarine forum / Raymarine Forums / Multifunction Displays v / Fusion MS-BB300R Connection to a125

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fusion MS-BB300R Connection to a125
07-10-17, 05:36 AM
Post: #1
Midnightsun Offline
Junior Member
**
 		Posts: 7
Joined: Jun 2016
Reputation: 0
Fusion MS-BB300R Connection to a125
I am trying to find out if I can connect my Fusion MS-BB300R to my Raymarine a125. I mistakenly assumed this radio was compatible with the a series however now realize it only talks NMEA2000.
Find all posts by this user
Quote this message in a reply
07-19-17, 02:08 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Fusion MS-BB300R Connection to a125
Welcome to the Raymarine Forum

Per Section 25.1 Fusion link application overview of the LightHouse II Release 17 Operating Instructions, a/c/e/eS/gS-Series MFDs operating with LightHouse II v17.xx or v19.03 software are compatible with the Fusion BB300. As this Fusion product features a NMEA 2000 communications interface, it will be interfaced as a spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the MFD has also been interfaced as a spur.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication