Raymarine forum / Raymarine Forums / Multifunction Displays v / Axioms networked issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axioms networked issues
07-22-17, 01:06 PM
Post: #1
qbayle Offline
Junior Member
**
 		Posts: 35
Joined: Mar 2016
Reputation: 0
Axioms networked issues
2 axiom 9 RV models, Jones nd by raynet, slave unit pops up the disply brightness menu constantly.
Find all posts by this user
Quote this message in a reply
07-24-17, 02:59 PM (This post was last modified: 07-27-17 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axioms networked issues
Welcome to the Raymarine Forum qbayle,

Please click here to view a FAQ addressing product drain leads. Following receipt of similar posts, Raymarine has been investigating the subject problem. Raymarine has also introduced changes to the Axiom Power swipe firmware to be included within the v3.1.96 LightHouse III software update for Axiom MFDs. This modification may well address the reported issue. Should the MFD's software have been updated to v3.1.96 and the drain lead have been installed in the manner specified within the referenced FAQ, and should the problem persist, then please respond accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication