Raymarine forum / Raymarine Forums / Autopilots v / EV-100 and multiple data sources

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-100 and multiple data sources
08-22-17, 09:47 AM (This post was last modified: 08-22-17 10:33 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: EV-100 and multiple data sources
Welcome to the Raymarine Forum colbournee,

I suspect the problem is resulting from looped NMEA 0183 data. In such a situation, the Lowrance MFD may be looping (re-transmitting) received NMEA 0183 communications from the Nobeltec software. Such issues are not uncommon in systems featuring NMEA 0183 communications featuring more than one chartplotting device. This problem may be resolved by installing switch(es) which will only permit one of the two NMEA 0183 talkers from transmitting to the NMEA 2000 backbone. Alternatively, you may want to check the configuration settings of the Lowrance MFD or Actisense Mux (assume that one has been dedicated to the Lowrance MFD) to determine whether one of these devices may be configured to not transmit or not bridge NMEA 0183 sentences containing navigational data.

The autopilot's MDS feature would not be applicable to this issue.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: EV-100 and multiple data sources - Chuck - Raymarine - Moderator - 08-22-17 09:47 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication