Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacing A70 Classic with ???
08-28-17, 10:51 AM
Post: #1
Replacing A70 Classic with ???
I am looking to get a little bigger presence at the helm by replacing my Classic A70 with another Raymarine MDF. Can I do this just by swapping out the A70 for an A95? Would this be as simple as plug and play? Would other models be more appropriate for the swap....if I am trying to avoid a lot of rewiring or transducer replacement?

Thanks for the suggestions.
Mike
Bavaria 38
Find all posts by this user
Quote this message in a reply
08-28-17, 01:09 PM
Post: #2
RE: Replacing A70 Classic with ???
Welcome to the Raymarine Forum Mike,

Replacement of the A70 MFD with an a95 MFD would require replacement of the a70 MFD's Power/NMEA 0183 Cable with the Power/NMEA 0183 Cable supplied with the a95 MFD. Should a cable presently be interfaced to the A70 MFD's SeaTalkng communications port, then it would need to be disconnected from the A70 and then connected to the a95 MFD's SeaTalkng communications port. With regard to the transducer you have referred to, please note that unlike the A70D, the A70 did not feature a transducer socket to accommodate a fishfinder transducer.
Find all posts by this user
Quote this message in a reply
08-28-17, 01:19 PM (This post was last modified: 08-28-17 01:37 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Replacing A70 Classic with ???
Thank you Chuck. Appreciate the quick response.
Find all posts by this user
Quote this message in a reply
08-28-17, 01:38 PM
Post: #4
RE: Replacing A70 Classic with ???
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)