Lighthouse 3 display of temperatures

[heatz]

Can LH3 display different temps, such as Freezer, Fridge, Ambient, Engine Room etc. if they are available in the PGN 130311 data. Software I am using supports:

enum tN2kTempSource {
N2kts_SeaTemperature=0,
N2kts_OutsideTemperature=1,
N2kts_InsideTemperature=2,
N2kts_EngineRoomTemperature=3,
N2kts_MainCabinTemperature=4,
N2kts_LiveWellTemperature=5,
N2kts_BaitWellTemperature=6,
N2kts_RefridgerationTemperature=7,
N2kts_HeatingSystemTemperature=8,
N2kts_DewPointTemperature=9,
N2kts_ApparentWindChillTemperature=10,
N2kts_TheoreticalWindChillTemperature=11,
N2kts_HeatIndexTemperature=12,
N2kts_FreezerTemperature=13,
N2kts_ExhaustGasTemperature=14
};

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum heatz,

At the time of this response LightHouse II and LightHouse 3 software both exclusively support displaying Sea Temperature, Outside Air Temp, Dew Point, Apparent Wind Chill, True Wind Chill, Engine Coolant Temp, Engine Oil Temp, and Engine Transmission Temp when interfaced to corresponding NMEA 2000 sources of this data.