e125 keys falling off

[javespe]

Thanks for the info Chuck.

However, I am a bit puzzled about what I need to do. Are you referring to the bezel which goes around the entire perimeter of the unit? (See Attached Photo).

The keymat/buttons are completely intact for both and show spots on their undersides that resemble some sort of adhesive used to secure the keys to the buttons.

Is there a diagram somewhere for reference? Sounds extreme to replace the entire mat when its just the keys that peeled off.

(09-06-17 11:18 AM)Chuck - Raymarine - Moderator Wrote:  Welcome to the Raymarine Forum javespe ,

Raymarine does not have a recommended adhesive for this application. Should the reported issue occur then the R70151 c9x/e9x MFD Key Mat should be removed and replaced. The key mat of c/e-Series MFDs is held in place by the MFD's trim bezel and tabs on its left side. After removing the trim bezel, the key mat simply lifts from the MFD. Please click here to view a FAQ addressing where one may purchase parts for one's Raymarine products.