Raymarine forum / Raymarine Forums / Networking / System Integration v / SeaTalkng power vs power from the distribution panel

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SeaTalkng power vs power from the distribution panel
03-22-16, 10:10 AM (This post was last modified: 03-24-16 10:57 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: SeaTalkng power vs power from the distribution panel
Welcome to the Raymarine Forum TributeJ42,

Q1) If I want to share data across the established SeaTalkng network with the new equipment will that not also supply 5A to the new equipment?
A1) No. Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the MFD, VHF radio, AIS receiver/transceiver, radome, and Fusion radio should each be powered via the respective product's power cable leads or power terminals.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: SeaTalkng power vs power from the distribution panel - Chuck - Raymarine - Moderator - 03-22-16 10:10 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication