E120 CF card holder

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Eirinnrose,

Unfortunately, should the pin have bent over sufficiently far, then it may have shorted with one or more of the reader's other pins, resulting in damage to the MFD's circuitry. It would have normally be recommended that the MFD be sent to Raymarine's Product Repair Center to replace the MFD's memory card reader. Unfortunately, the supply of readers for E-Series Classic MFDs has been permanently exhausted. Accordingly, you may want to try as best as you can to straighten the bent pin. Unfortunately, should the pin break or should the MFD afterwards be unable to read data from a chart card within its memory card reader, then the MFD would need to be replaced unless the marine electronics system features two or more E-Series Classic MFDs. In the case of the latter, then the chart card may be inserted into the memory card reader of another one of the system's MFDs.