Low voltage warning on Dragonfly "6"

[spdmtl]

Anyone else get the warning for "Low Voltage" when you know your battery, connections and everything else is good. I can't figure this out. I've re-soldered the connections and all tested before use. My battery (7.5 ahr) tests at 13.7v before hooking it up. Two hours later(give or take) I get the warning and in 5 minutes the unit shuts off. I have the latest upgrade and I thought this would help the issue and has not. My battery read 13.2v when I came back. Same with other batteries as well. Any ideas? Thanx, BILL

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum spdmtl,

Given the reported symptom, it is recommended that the display be sent to Raymarine’s Product Repair Center to be bench checked / serviced.