Converting SG2 Smartpilot to NMEA 2000 and New Network

[moonzy1]

Thank you for your reply
I am confused though. The actisnese is not supposed to be connected this way?
This is what raymarine tech support told me to do.

I worked out the seatalk side. wires were in the wrong order and all instruments are now functioning as they should

The Axiom still does not see the autopilot but it does see the heading sensor.

I spoke to Raymarine tech support and they said because the autopilot was an older unit, th eMFD will not see it but it can be controlled into following a waypoint via Tracking.

Does that sound rt?

Thanks