Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thermal camera compatibility with C-Series Widescreen MFDs
03-22-16, 01:44 PM (This post was last modified: 03-24-16 10:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
Thermal camera compatibility with C-Series Widescreen MFDs
We're buying a boat with a C120W display already installed. Can it accommodate a FLIR camera?
Find all posts by this user
Quote this message in a reply
03-22-16, 02:06 PM (This post was last modified: 03-22-16 02:50 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: C120W
Welcome to the Raymarine Forum glc203,

As the C-Series Widescreen MFDs feature support for a NTSC/PAL video input, it would indeed be possible to interface a C-Series Widescreen MFD to Raymarine T-Series or FLIR M/MD Series branded thermal camera. As the C-Series Widescreen MFDs are not designed to support Ethernet communications with a thermal camera, it will be necessary to additionally install a Joystick Control Unit (JCU) to facilitate control the camera.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-24-16, 08:44 AM (This post was last modified: 03-24-16 09:08 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: C120W
Great. Thank you.
Find all posts by this user
Quote this message in a reply
03-24-16, 09:08 AM
Post: #4
RE: C120W
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)