Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] E120 data feed, move from Seatalk 1 to Seatalk ng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] E120 data feed, move from Seatalk 1 to Seatalk ng
11-02-17, 12:22 PM (This post was last modified: 11-02-17 12:47 PM by Chuck - Raymarine - Moderator.)
Post: #5
lotharjt Offline
Junior Member
**
 		Posts: 40
Joined: Feb 2016
Reputation: 1
RE: E120 data feed, move from Seatalk 1 to Seatalk ng
Excellent advice, thanks.

Update: I checked the bridge s/w version, it reports as having v2.3. Software update on the raymarine website lists v2.03 as most current. With that package on a the data card, I went all the way to the point of 'ready to update' and got a msg on the E120 saying the current version installed is the same or newer, so I cancelled the update.

Any other advice?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E120 data feed, move from Seatalk 1 to Seatalk ng - lotharjt - 11-02-17 12:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication