CP370 Data Drops with Axiom 12

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum vacantid,

Please refer to the information provided within your other thread addressing how the equipment should be interfaced. Not mentioned within your other thread were the three CAM220IP cameras, which should also be mated the system's Ethernet network switch. Please note that there were some early software issues within LightHouse 3 software which may be responsible for communications with a CP370 sounder module. Please ensure that your Axiom MFD(s) have been updated with the latest available Raymarine product software update (verified). As LH3 v3 software does yet not support updating the software Ethernet peripherals as you have pointed out, it would be recommended that the software within the Quantum radome and CP370 be updated by an authorized Raymarine dealer (call first) or Certified Raymarine Installer, or that they be sent to Raymarine’s Product Repair Center to receive software updates. It is very likely that one of the next two LH3 updates will add support for updating Ethernet peripherals.

Q2. When I boot the Axiom 12 (3.2.97) and my CP370 (software is 1 rev back) I see depth displayed on the P70. However when I choose the Chart App I lose depth on the chart and the P70. I can only see depth if I display a chart app and the fishfinder app. If I turn off the fishfinder app and choose any other set of apps no depth is available.
A2. Are you reporting that the Depth data item displayed within the Chart application is reported -.- for depth or are you reporting that no Depth data item displayed within the Chart application?