Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST6001 Calibration Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST6001 Calibration Issues
11-27-17, 03:39 PM (This post was last modified: 05-24-19 07:39 AM by Chuck - Raymarine - Moderator.)
Post: #9
tpburt Offline
Junior Member
**
 		Posts: 9
Joined: Nov 2017
Reputation: 0
RE: [CA11] ST6001 Calibration Issues
Took some time over the Thanksgiving week and did some additional troubleshooting.

When I try to complete the Seatrial calibration, the control unit will not change from "Turn Boat". As suggested, I also tried running through the calibration with the gyro disconnected but ended with the same result. Even if I speed up and run in circles or a straight line it will not change from Turn Boat.

If I select any waypoint and engage the autopilot, it will begin to work, just heading in the wrong direction. Does the fact that the AP engages rule out a problem with the computer?
Trent
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST6001 Calibration Issues - tpburt - 11-16-17, 03:18 PM
RE: [CA11] ST6001 Calibration Issues - tpburt - 11-27-17 03:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication