[TG] [TG11] Wireless display / Miracast setup tips?

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Steve,

As you have indicated, your MFD can be connected to a wireless display using an external dongle or a display that has built-in support. When connected the MFD's screen is mirrored on the wireless display. Per Section 4.11 Connecting to a wireless display of the LightHouse v3.3xx Axiom and Axiom Pro Advanced Operation Instructions:

2. Some non Miracast certified devices may not be able to connect with Wi-Fi Sharing enabled, in this case disable Wi-Fi Sharing and try again.
3. If you experience issues connecting try disabling and enabling the wireless display feature on your display and MFD or power cycle both devices.
4. Once connected/paired to a wireless display do not change your MFD’s Wi-Fi Passphrase as on certain devices a factory reset maybe required to re-establish a connection.

Please let me know if the above recommended actions do not resolve the reported issue. If so, I will then forward your questions concerning specific version of Miracast that is supported, or a particular limit or list of devices supported.