Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Importing Waypoints from Voyager Planner to a C-95
12-07-17, 10:47 AM (This post was last modified: 12-07-17 11:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
Importing Waypoints from Voyager Planner to a C-95
[CA] Chuck, Trying to import way points to my C-95 from Voyager Planner the MFD won't upload the files. The software in the C-95 is updated to V9.3, and when starting the upload the file GPX, message pops up saying chart in use retrieving failed.
The file is attached
Find all posts by this user
Quote this message in a reply
12-07-17, 11:52 AM (This post was last modified: 12-07-17 11:55 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Importing Waypoints from Voyager Planner to a C-95
Welcome to the Raymarine Forum Gordon,

Please note that the latest version of software for the a/c/e/eS/gS-Series MFDs is v19.03, not v9.3 as you have indicated. The reported issue has resulted from violation of one of the constraints documented within the FAQ found here. More specifically, several of the waypoints within your GPX file feature comments exceeding the maximum number of characters specified within the referenced FAQ. Accordingly, it is recommended that your waypoints within VP be edited to reduce the length of your comment strings to be less than the maximum number of characters specified within the referenced FAQ and that afterwards a new GPX file be exported from VP.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)