[CA] Using EBL/VRM independently

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum OBSR,

Within Raymarine's MFDs operating with LightHouse II software, the only feature vaguely fitting your description supported by the MFD's Radar application is the ability to command navigation to a waypoint from within the Radar application. However, this feature is not in any way related to the VRM / EBL feature. Essentially, the user may place a waypoint at the location of radar target. Touching the screen of the Radar application in the location where you desire to navigate to will present a context menu providing an option to create a waypoint at that location. Should this menu option be selected, then a waypoint symbol will be rendered at the location which you had pointed to. After doing so, touching the screen of the Radar application where the waypoint symbol is displayed once again display a context menu providing an option to Go To Waypoint. Please note that this feature is only supported in conjunction with MFDs which have been interfaced to a source of heading data.