The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] NMEA 0183 Connections

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] NMEA 0183 Connections
01-10-18, 04:09 PM (This post was last modified: 01-11-18 11:01 AM by Chuck - Raymarine - Moderator.)
Post: #1
jwasko Offline
Junior Member
**
 		Posts: 30
Joined: Dec 2017
Reputation: 1
[CA] NMEA 0183 Connections
I need to connect the NMEA-0183 output of a Raystar 125 to an e165.
The GPS has a single yellow output lead whereas the MFD has + and - input leads. If I connect the yellow output lead from the GPS to the + input lead on the MFD, what should I do with the - input lead?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] NMEA 0183 Connections - jwasko - 01-10-18 04:09 PM
RE: [CA] NMEA 0183 Connections - jwasko - 01-22-18, 06:51 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication