Transducer removal mechanics

[MVClockwork]

(03-29-16 03:34 PM)Steve - Raymarine - Moderator Wrote:  Those pictures don't look like it is removable, there would be some type of plastic locking nut at the top if the insert was removable. What is the transducer connected to? It can't connect directly to the E120 Classic MFD.

For some reason, these replies don't seem to be applied by the site to the thread. So, doing it again...

Yes Steve... there is a plastic locking ring that lives on top of that thread but it has been removed already. You can see the threads it usually covers. As to where that cord goes... I'm not entirely sure as I did not get an electronics wiring diagram with the boat and I'm still figuring much of that out myself. If I had to guess though, I'd say it probably connects to the DSM300. Hope this extra info helps... thanks...