(DG) Replacing a 150ASG with an ACU-200 -- wiring questions

[ddfour1]

Derek,

OK I got the wiring complete on my ACU200 and now have a solid green LED indicator. I ran the setup on the p70Rs and got an indication that setup was complete. Software on my Axiom is up to date at 3.4.66. p70Rs control head software is 3.07.

When I run the dockside wizard and I get to the part where it asks me to center the rudder and move it port, then starboard, then back to center, I get the dreaded "Task Failed - Inconsistent values" error.

What is the proper sequence to resolve this issue?

1. I am using the rudder reference indicator and pump from my old AP system which was controlled by a 150G course computer. The pump and indicator were working immediately prior to the new install.

2. Do I need to manually align the rudder reference indicator with the rudder shaft prior to running the calibration?

3. Other things to look at?

Thanks,

Dave