Raymarine forum / Raymarine Forums / Autopilots v / [CA] SPX 10 and ST 70 software update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] SPX 10 and ST 70 software update
02-12-18, 09:16 AM
Post: #16
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] SPX 10 and ST 70 software update
Gordon,

As long as the autopilot is properly configured with respect rudder motion (i.e. rudder responds correctly to commands) and type of vessel, then the performing the Dockside Wizard again would be unnecessary. If after sea trial calibration, the autopilot's heading is correct, then you should be all set.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] SPX 10 and ST 70 software update - Chuck - Raymarine - Moderator - 02-12-18 09:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication