[CA] track function in Chart app of Axiom MFD
|
02-05-18, 09:59 AM
(This post was last modified: 02-05-18 04:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA] track function in Chart app of Axiom MFD
Hi,
If I turn on the "tracking" function in Chart/Map app (with Navionics card inserted) from my Axiom 9" RV100, then I switch out of the Chart app and open Sonar app. Would this switch stop my tracking in my Chart app? Thanks. http://www.youtube.com/njfishing1 - from Captain Steve |
|||
02-05-18, 04:41 PM
Post: #2
|
|||
|
|||
RE: [CA] track function in Chart app of Axiom MFD
Welcome back to the Raymarine Forum Ray18,
Q1. If I turn on the "tracking" function in Chart/Map app (with Navionics card inserted) from my Axiom 9" RV100, then I switch out of the Chart app and open Sonar app. Would this switch stop my tracking in my Chart app? A1. Doing as you have suggested should not cause a track which as been started to be stopped. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)