Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP570 with Airmar R109C LHW
03-29-16, 09:01 PM (This post was last modified: 03-30-16 09:36 AM by Chuck - Raymarine - Moderator.)
Post: #1
CP570 with Airmar R109C LHW
Hi,
I have been some troubles to install Airmar R109C LHW with CP570 module.
The problem is the R109 comes with bare wire cables and CP570 needs a 11 pin connector.
So I bought a Raymarine 11 pin extension cable # A102150 and cut it to get some cable with the connector, but I don't find the Raymarine 11 pin wiring diagram to connect it with R109 bare wire.
Please I need some help
Thanks

Juparethan Ribeiro

juparethan@hotmail.com
Find all posts by this user
Quote this message in a reply
03-30-16, 09:33 AM (This post was last modified: 04-04-16 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: CP570 with Airmar R109C LHW
Welcome to the Raymarine Forum Juparethan,

Please click here to view a FAQ addressing this subject. While you may want to consider consulting with Airmar on this subject, it is strongly recommended that the recommendations specified within the referenced FAQ be adhered to.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-09-16, 01:25 PM (This post was last modified: 04-11-16 09:38 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: CP570 with Airmar R109C LHW
I had the same issue.
You will need to buy a junction box from Gemeco Marine.
(843) 210-7000 it is a pain to wire together but once done works great.

Love the system, amazing abilities.
Find all posts by this user
Quote this message in a reply
04-11-16, 03:22 PM
Post: #4
RE: CP570 with Airmar R109C LHW
Noted.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)