[CA] Can't calibrate wind transducer through i70s

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum John,

Wind transducers which had been designed for use with ST50/ST50+ Wind Instruments cannot be calibrated by a ST60+ Wind Instrument or a i70/i70S MFID which has been interfaced to an iTC-5. The currently installed transducer will need to be replaced with an E22078 Wind Vane transducer. Regarding the speed transducer, it will not be sensed by the iTC-5 until it senses motion of the transducer's paddlewheel. When sense, the iTC-5's Speed/Temp LED will switch from flashing green to being solidly illuminated green.