Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom Pro RVX Touch Screen Issue
03-07-18, 07:54 PM (This post was last modified: 03-08-18 10:14 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom Pro RVX Touch Screen Issue
On a brand new Axiom Pro RVX with RV-100; when on the Real Vision screen, when I try to use screen touch control to expand view or turn view, the result of the finger motion on the screen is opposite. For example, if I try to move up, the image goes down. Opinion on issue? Thanks.
Find all posts by this user
Quote this message in a reply
03-09-18, 09:15 AM
Post: #2
RE: [CA] Axiom Pro RVX Touch Screen Issue
Welcome to the Raymarine Forum karlista,

When using one's finger adjust the viewing angle, one must understand that the action is essentially a push / drag operation. For example, with the RealVision viewing pane displayed and vessel icon positioned above the bottom, swiping ones finger from left to right will move the select portion of the screen to the right, effectively causing the image to rotate clockwise. Similarly, positioning one's finger beneath the water's surface and then swiping ones finger toward the bottom of the screen will move the select portion of the screen to the bottom of the screen, effectively causing the image to rotate from a view beneath the vessel to a view which will be from a perspective which is from a shallower depth or from above the water's surface.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)