[CA] Raystar125 Connection with Seatalk ng

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] Raystar125 Connection with Seatalk ng

01-17-19, 09:59 PM (This post was last modified: 01-18-19 08:55 AM by Chuck - Raymarine - Moderator.)

Post: #7

Redman Offline

Junior Member

Posts: 9
Joined: Mar 2018
Reputation: 0

RE: [CA] Raystar125 Connection with Seatalk ng

Thanks Chuck. Since it appears only the VHF can be connected to this converter, is it possible to have second seatalk to seatalk ng converter within the system to interface the ST6001 autopilot? If so I assume the converter would be connected via a blue backbone cable. Would both need to be powered or just one? If only one, does it matter which?

I should also ask if a device such as The Actisense NGW-1 device would be another method to connect the VHF to the backbone and receive the GPS signal from either the axiom internal GPS or the RS150.

« Next Oldest | Next Newest »

Messages In This Thread

[CA] Raystar125 Connection with Seatalk ng - Redman - 03-16-18, 06:11 AM

RE: [CA] Raystar125 Connection with Seatalk ng - Chuck - Raymarine - Moderator - 03-16-18, 12:57 PM

RE: [CA] Raystar125 Connection with Seatalk ng - Redman - 01-16-19, 07:27 AM

RE: [CA] Raystar125 Connection with Seatalk ng - Chuck - Raymarine - Moderator - 01-16-19, 11:33 AM

RE: [CA] Raystar125 Connection with Seatalk ng - Redman - 01-16-19, 08:50 PM

RE: [CA] Raystar125 Connection with Seatalk ng - Chuck - Raymarine - Moderator - 01-17-19, 09:51 AM

RE: [CA] Raystar125 Connection with Seatalk ng - Redman - 01-17-19 09:59 PM

RE: [CA] Raystar125 Connection with Seatalk ng - Chuck - Raymarine - Moderator - 01-18-19, 09:03 AM

User(s) browsing this thread: 1 Guest(s)