Raymarine forum / Raymarine Forums / Autopilots v / (DG) Autopilot won't work

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Autopilot won't work
03-23-18, 09:21 AM (This post was last modified: 03-23-18 09:34 AM by Derek - Raymarine - Moderator.)
Post: #1
flbluerunner Offline
Junior Member
**
 		Posts: 11
Joined: Feb 2016
Reputation: 0
(DG) Autopilot won't work
Greetings,
I have an IPS boat with an 8002 autopilot.
When I try to use the autopilot I get a NO IPS on the screen.
I have checked all connections, any guidance would be appreciated.
Find all posts by this user
Quote this message in a reply
03-23-18, 09:37 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) Autopilot won't work
Hi flbluerunner

Thank you for your enquiry.

The IPS pilot used a DPU and a VOLVO gateway, the most likely scenario is that one of these units has failed.

We would recommend that the local Raymarine Service agent is called to the boat to investigate further, since neither of these devices can be tested individually.
Regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication