Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Auto tack or auto turn
04-08-18, 12:29 PM (This post was last modified: 04-09-18 03:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Auto tack or auto turn
I have a new ev1,P70 and tiller pilot, just connected to existing e57 and St60+ set.

The pilot seems ok, but when in auto mode and press together 10 and 1 keys to tack, the pilot aims for 90 degrees. This boat is a catamaran and I want to change this to 100 or even 110 to make sure she makes the tack. I can trim afterwards.

Note this is not in wind mode.

any help greatfully received.

peter
Find all posts by this user
Quote this message in a reply
04-09-18, 03:16 PM (This post was last modified: 04-16-18 09:28 AM by Derek - Raymarine - Moderator.)
Post: #2
RE: [CA] Auto tack or auto turn
Welcome to the Raymarine Forum Peter,

This setting can be adjusted by ensuring CAL LOCK is set to OFF and the AUTO TURN angle is adjustable in the DRIVE settings menu.

regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)