[DG] Realvision 3D sloping bottom problem

[Seaballast]

Derek - I just installed an AXIOM 9RV, AXIOM 12 slave and a pair of RV212s. I have a similar problem with my port RV212 where my 3D rendering is sloping identical to what stevescottuk posted above. Both transducers are mounted equidistant from and close to the centerline in clean water. The cables are equal in length and not damaged and to not appear to be affected by any other device carrying high current or signalling frequencies. I'll try your suggestion and reset the sounder and see what happens next time I drop the boat in.

However, related to this problem, my water temp is showing 110F in 75F water. Is the temperature sensor located in the port or starboard transducer? Could a reset potentially cure that issue as well?

If the transducer is bad, does Raymarine have a program where they could send me a replacement transducer under warranty so I'm not stuck on the hill with a [censored] in my hull waiting for the mail? Thanks - Steve