(DG) i60 Calibration

[Derek - Raymarine - Moderator]

Hi sfsail923
Thank you for your enquiry.

First identify which i60 is the 'master' display, that is to say, the one that the masthead transducer is connected to. (you will see on the rear of one of the displays there is a 5 core cable plugged in to the transducer connections. This 'master' display is the one that is used to calibrate the masthead transducer to provide correct apparent wind angle.

The calibration process can be found in Chapter 7, section 2, entitled ALIGNIING THE WIND TRANSDUCER, where it describes motoring the boat head to wind, then accessing the USER calibration to align the pointer correctly, noting that this should be done when apparent wind mode is selected.

The handbook can be found click here

regards