Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
0.5 L Hydraulic pump spec discrepancy
07-26-16, 11:16 AM
Post: #20
RE: 0.5 L Hydraulic pump spec discrepancy
Hi Chuck,

Thanks for that information. That's good to know that I can hook the leads up to 12v +/- for verification that the pump is working in both directions. It is currently wired up to the ACU via the A/B motor terminal block that was provided, but I can pull the wires out of the block and connect to 12v +/- for testing if it comes to that. Additionally, I don't have a rudder reference unit attached in this setup.

I created a separate thread yesterday about this issue so I wouldn't stray to far off of topic from what this thread was started for initially. In that I described the problem a bit more in detail.

1977 SeaRay SRV 240 SDB
Raymarine a78 / CPT100, EV-100 Power, CP200 / CPT 200, Ray60
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: 0.5 L Hydraulic pump spec discrepancy - scoffer - 07-26-16 11:16 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)